Select Product for Calculation

Please Enter Sqft Area

Sqft

Product Description

Polydeck® MR

48 Dry Mils (1219 microns) Everyday Choice Decking

Primer Basecoat Intermediate Coat Aggregate Topcoat
  • Polyprime® 2180SC
  • 1 gallon/300 sqft (0.14 liters/sqm)
  • 3-5 dry mils (76-127 microns)

  • PC-220SC
  • 2 gallon/100 sqft (0.82 liters/sqm)
  • 28 ± 2 dry mils (711 ± 51 microns)

Optional;
  • Poly-I-Gard® 295 may be substituted for PC-220SC
  • Apply Poly- IGard® 295 at 2 gallons/100
  • resulting in a 30 ± 2 dry mils (762 ± 51 microns).
  • broadcast sand aggregate

    • Wash rounded sand
    • 20 mesh
    • 10lbs/100 sqft (0.50 kgs/sqm)


    • Poly-I-Gard® 246SC
    • 1 gallon/100 sqft or 100 sqft/gal ,
    • broadcast washed, dry, rounded
    • 20 mesh
    • 14 ± 2 dry mils

     
    • Poly-I-Gard® 295 may be substituted for Poly-I-Gard® 246SC.
    • 1 gallon/100 sqft
    • 14 ± 2 dry mil (357 ± 50 dry microns

Application will require more or less material depending on substrate conditions.

Please read all information in the General & Safety Guidelines, Technical Data Sheets, Guide Specifications and Safety Data Sheets (SDS) before applying material. Polycoat Products are for “Professional Use Only” and preferably applied by professionals who have prior experience with Polycoat Products or have undergone training in application of Polycoat Products. Published technical data and instructions are subject to change without notice. Contact your local Polycoat representative or visit our website for current technical data, instructions, and project specific recommendations.

LIMITED WARRANTY

Polycoat warrants its products to be free of manufacturing defects and that they will meet Polycoat current published physical and chemical properties. Seller’s sole responsibility shall be to replace that portion of the product which proves to be defective. There are no other warranties by Polycoat of any nature whatsoever expressed or implied, including any warranty of merchantability or fitness for a particular purpose in connection with this product. Polycoat shall not be liable for damages of any sort, including remote or consequential damages resulting from any claimed breach of any warranty whether expressed or implied. Polycoat shall not be responsible for use of this product in a manner to infringe on any patent held by others. In addition, no warranty or guarantee is being issued with respect to appearance, color, fading, chalking, staining, shrinkage, peeling, normal wear and tear or improper application by the applicator. Damage caused by abuse, neglect and lack of proper maintenance, acts of nature and/or physical movement of the substrate or structural defects are also excluded from the limited warranty. Polycoat reserves the right to conduct performance tests on any material claimed to be defective prior to any repairs by owner, general contractor, or applicator.

DISCLAIMER

The Polycoat calculator is only used to derive theoretical coverage rates for ICRI CSP#3 or less concrete, metal, and plywood surfaces. The calculator does not take into account rough surfaces, pinholed concrete, ponding water, and negative slopes, and high wear areas. Actual conditions for specific projects regarding aggregate, ponds, sloping, surfaces beyond, and ICRI CSP#3 should be evaluated for, aesthetics, functionality, and slip resistance for bidding during the required mockup of the system prior to providing hard bid values.